OMICRON Lab B-AMP 12 Power Amplifier for Bode 100

 

Specifications

General characteristic	Rating
Frequency range	DC – 50 MHz
Gain (1 Hz – 50 MHz)	12 dB ±0.25 dB into 50 O
Signal connector type	BNC
Input characteristic	Rating
Maximum input signal	1 VRMS ( 13 dBm / 2.83 VPP)
Input impedance	50 O
Input return loss	> 30 dB
Damage level	10 VPP
Output characteristic	Rating
Maximum output amplitude	25 dBm ( 11.3 VPP) into 50 O
Output impedance	50 O
Output return loss	> 30 dB
Output DC offset	< 10 mV (input and output terminated with 50 O)
Damage reverse power	1 W
Input to CH1 attenuation	14.5 dB typ. (output terminated with 50 O)
Input to CH2 attenuation	20.8 dB typ. (output terminated with 50 O)
Output to CH2 voltage gain	-33 dB ( x0.022) into 50 Ohm

DC Power Requirements

characteristic	Rating
Supply voltage range	10 – 36 VDC
Power consumption	at 12 V: < 440mA typ. at 24 V: < 220mA typ.
Power connector / socket	Coaxial power socket (2.5 mm / 5.5 mm) Inner connector positive polarity (+)

Environmental Specifications

characteristic	Rating
Operating temperature	5 °C … +40 °C / 41 °F … +104 °F
Storage temperature	-35 °C … +60 °C / -31 °F … +140 °F
Relative humidity	20 % … 80 %, non-condensing

Mechanical data

characteristic	Rating
Dimensions (with connectors)	138 mm x 75 mm x 32 mm 5.43 inch x 2.95 inch x 1.26 inch
Weight	0.21 kg / 0.46 lbs

If you're not satisfied with this product or it doesn't work for your measurement setup, you can return this product for a full refund within 30 days of purchase.

We ship our products anywhere that FedEx or UPS can deliver products. We do not include shipping costs in the price shown. Any additional shipping costs will be included at checkout.

One (1) Year Manufacturer's Warranty

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

• Warranty: PICOTEST CORP. guarantees that this product meets its published specifications at the time of shipment from the factory.
  Under proper installation it should work as expected.
• Warranty Period: This equipment is warranted against defects in material and manufacturing for a period of one (1) year from the date of shipment. During the warranty period, Signal Edge Solutions is responsible for necessary repairs as long as the product can be proved to be defective.
  For warranty service or repair this product must be returned to a service facility designated by Signal Edge Solutions. Please contact your local service representative.
• Excluded Items: This warranty does not include consumptive parts such as fuses, buttons and relays. Neither does this warranty cover
  defects caused by improper installation, improper or insufficient maintenance, unauthorized modification, improper operation, ignorance of environmental specifications or improper software or interfacing.
• Remarks:
• No other warranty is expressed or implied, except for the above mentioned.
• The remedies provided herein are the buyer’s sole and exclusive remedies. Signal Edge Solutions shall not be liable for any direct, indirect, special, incidental or consequential damages.

Limitation of warranty

• Our warranties do not cover any damage resulting from unauthorized modification or misuse.
• Unless mentioned elsewhere in this document, our warranty does not apply to fuses, probes, and problems arising from normal wear or your abnormal operations.
• Our warranties do not apply on any direct, incidental, special, or consequential damages.
• The above warranties are exclusive and no other warranty is expressed or implied. Signal Edge Solutionsdisclaims any implied warranties of MERCHANTABILITY, SATISFACTORY QUALITY, and FITNESS for any particular reasons.