Description
The J2116A is a combined unit with source power amplifier and ground isolator with up to 22.5dB gain and 100dB CMRR. It is used to improve signal-noise in crosstalk and ultra-low impedance measurements. It achieves +20dBm output with +/-9V power and +22.5dBm with +/-12V power. It is compatible with all popular VNAs, including the Keysight E5061B and the OMICRON Lab Bode 500.
The J2116A can be powered from +/-9V – +/-12V using an external power supply or batteries. Power is applied to the unit using connections from a supplied 4-pin Molex connector VEE-GND-GND-VCC (left to right). This is so that an external power supply can be used to power the isolator. SMA connectors are provided to input and output connections.
Key Features & Benefits
- Combined signal amplifier with high CMRR ground isolator
- +20dBm output / 100dB CMRR
- Supports 2-port shunt through impedance measurement as low as 1uOhm
- Works with 1-port probe including the P2105A and PacketMicro S-Probes
- Sub-uOhm impedance floor
- Measure crosstalk as low as -150dB
- Very flat response for simple de-embedding
- Compact design mounts directly on microprobe heads
- Isolator can run for 100 hours on a pair of 9V batteries
- Dynamic range can be improved by any combination of Increased test current (power amplifier on Port1), and/or Low-noise preamplifier (on Port2)
What’s included
- One (1) J2116A Power Amplifier and one (1) J2116A Isolation Amplifier
- Two (2) 4-pin Molex cables
- One (1) Year Manufacturer’s Warranty
Questions? Don’t hesitate to contact us.
J2116A High CMRR Power & Isolation Amplifier
Recommended Bandwidth DC-10 MHz Maximum Voltage Common mode + differential is 9.5V max Maximum Voltage Differential Differential mode is 7.07 Vrms max 9.5Vpk CMRR > > 100dB Temperature Range 0-50°C Maximum Altitude 6000 Ft Caution
To avoid equipment damage and/or severe injuries or death ensure that the absolute maximum ratings are observed and not exceeded at all times.