top of page

The M3522A - 6 1/2 Digit 4.3” digital multimeter enables you to run quickly with an easy-to-use GUI, temperature measurement capability, quick function setup, and a wide range of measurement options. TRMS offers a full range of measurement capabilities with higher levels of accuracy, speed, and resolution. For instance, the M3522A provides the following impressive key features:

  • Fast Power-Up
  • 3-Channel DCV Measurement
  • DC CTR Measurement
  • Large 4.3" Display
  • Real-Time Chart & Histogram
  • DC & AC Current Up to 10A
  • Capacitance Measurement Up to 100μF
  • Thermocouple Measurement
  • Sensitive Multi-Purpose Knob
  • Replaceable Current Fuse
  • Fast Measurement Setup
  • Dual Display Measurement
  • USB Host Datalogging (Time & Delay Setup) & FW Upgrade
  • Rear Panel Measurement
  • Fast Reading Rate: 100K Readings/s
  • 7.5 Mega-Reading Storage Memory
  • Compatible SCPI Commands
  • True RMS, More Accurate
  • Multi-Language Operation Selection
  • Universal 100V-240V AC Input Power
  • Standard USB & LAN Control Interfaces
  • Optional GPIB/RS-232 Interface (Easy External Interface Installation)
  • Supportive Multi-Point Data Acquisition

 

The M3522A can used for Optocoupler DC/AC CTR measurements.

 

Applications:

  • Data Acquistion
  • Design Verification Testing
  • Temperature testing

 

What's included:

  • M3522A DMM
  • Test Leads x1 set
  • USB Cable x 1pcs 
  • Power Cord 1 pcs
  • Spare Power Fuse x 1 pcs
  • User manual
  • Certificate of Calibration x 1 pcs
  • 1 Year Warranty

 

TEMPERATURE TEST

The M3522A supports three kinds of temperature measurement:

(1) RTD: PT100, D100, F100, PT385, PT3916, SPRTD, and RTD_USER

(2) Thermistor: 2252Ω, 5KΩ, 10KΩ, and NTC_USER

(3) Thermocouple: B, C, E, J, K, N, R, S, and T

 

USB SLOT

A USB slot is available to copy data from the memory to a storage drive. Screen prints also can be saved. Firmware updates can also be performed through this USB slot. Please note that the drive format is limited to FAT 32.

 

READINGS & MEMORY

The reading rates and the memory storage of the M352XA series are superior to competitive models, especially the M3522A.

(1) M3520A: Rate in 300 readings/s, memory with 1K readings

(2) M3521A: Rate in 10K readings/s, memory with 1.5M readings

(3) M3522A: Rate in 100K readings/s, memory with 7.5M

 

DATA ACQUISITION

The M3521A/M3522A makes setting up a start time and delay for datalogging easy. You can also acquire data from diversified sources using one of the optional cards below.

(1) M3500-opt01: 10-Channel Universal Scanner Card

(2) M3500-opt09: 20-Channel Universal Scanner Card

(3) M3500-opt12: 10-Channel Thermocouple Scanner Card

 

10A MEASUREMENT

The M3522A can measure up to 10A through the front panel. The fuse replacement (with the same specification) is simple. The warranty covers damages only through authorized repair.

 

QUICK FUNCTION SETTING

You can easily set up the M352XA series through the MENU operation. Pressing the function button for two seconds enters the measurement menu.

 

UNIVERSAL AC POWER INPUT

The M352XA series uses a switching adapter. This not only reduces the DMM's weight but also allows you to use 100V—240V AC power inputs. You do not have to change the voltage selection manually.

 

DIVERSIFIED COMMUNICATION

The M3521A/M3522A is equipped with USB & LAN interfaces. You can also purchase a GPIB/RS-232 card. However, the above interfaces are not available on the M3520A.

 

OPTIONAL ACCESSORIES:

  • M3500-opt01 10CH Scanner Card
  • M3500-opt04 GPIB Card
  • M3500-opt06 RS-232 Card
  • M3500-opt07 Kelvin Probe
  • M3500-opt08 4-Wire Needle Probe
  • M3500-opt09 20CH Scanner Card
  • M3500-opt10 Shorting Plug
  • M3500-opt11 K-Type Thermocouple Cable
  • M3500-opt12 10CH Thermocouple Scanner Card

 

THE STANDARD CONTENTS AND THE OPTIONAL ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Picotest M3522A 6 1/2 Digits 4.3”TRMS Multimeter

bottom of page