The Picotest UC10 3.5mm Universal 6-Way Calibrator enables the highest accuracy 1- and 2-port measurements for the OMICRON Lab Bode 100 and Bode 500, as well as supporting calibration for other traditional VNAs.  
Enables accurate passive component measurement 
Results accurate to several pH (<10pH) for Bode 100/500 VNA 
Works with all VNAs including Keysight E5061B, Rohde & Schwarz ZNL/ZNB, and Copper Mountain S Series 
Supports essential calibration accuracy when performing component characterization tests 
S parameter and Z (impedance) calibration  
Simultaneous calibration and de-embedding using matching board mounts 
Supports 1-port reflection and 2-port shunt through measurements 
Stable, accurate, and repeatable measurements – Built on precision controlled dielectric material, with multiple controlled parameters  
The most accurate component measurement solution for OMICRON Lab Bode 100 and 500 users 
 
Key Features
Allows accurate measurement without a calibration kit using matched component mounting boards. 
Accurate calibration standard for the Bode 100 and Bode 500 VNA 2-port shunt through impedance testing 
Enables accurate phase response required for SPICE Modeling features 
Supports S/Z domain calibration for use with all VNAs 
Includes 1-Port SHORT, OPEN, and LOAD 
Includes THROUGH (used also for 2-port OPEN) 
Includes 2-Port ISO-SHORT (for uOhm and fH impedance floor) 
Includes 2-Port MATCH 
(Typical) Data-based calibration file (aka Cal-Kit) for traditional VNA calibration 
DC-3 GHz Frequency Range *. Supports full frequency range of Bode 100/500. 
The Calibrator board supports a wide variety of part sizes (0201 – 7343) using our matching mounts. Custom board sizes are available for order. 
* based on a data based cal-kit, S-parameter data is available for the UC10.
 
What’s included
The UC10 3.5mm Universal 6-Way Calibrator includes a blank calibration board for mounting your parts, as well as an example board containing 1.2nH inductors (that can be reused). A torque wrench is also included so that the proper calibrated torque can be applied to the connectors. 
UC10 3.5mm calibrator board 
Calibrated torque wrench 
Matching component mount with 1.2nH + 100pH (8%) chip inductor (board can be re-used) 
One (1) blank test board  
Board holder 
One (1) Year Manufacturer’s Warranty