KEY FEATURES:

Easily measure and analyze:

Stability of Power Supplies such as DC/DC converters, switchers, POLs, and LDOs
PDN and VRM Output Impedance - Power Integrity
Characteristics of passive components and circuit boards (SPICE modeling)
Power-plane impedance for optimum decoupling
Swept S-parameters (Touchstone) of electronic circuits and filters
Complex gain of any circuit (Loop gain, filter and amplifier gain etc...)
Complex impedance and admittance
Ultrasonic and piezo electric devices
Resonance behavior of high Q-circuits like oscillating crystals
Group delay characteristics of your DUT

Click here if you would like to reserve an Evaluation (‘Demo’) Unit. We will add you to our list and as soon as a unit becomes available, we will contact you. There is no cost to demo our products!

FAST AND EASY MEASUREMENTS WITH THE BODE 100

With the multifunctional Bode 100 you get an exact picture of your electronic circuits and components in a frequency range from 1 Hz to 50 MHz. The Bode 100 is not only a state of the art Vector Network Analyzer, it also works as:

Frequency Response Analyzer
Impedance Meter
Gain Phase Meter
Sine Wave Generator

Accurate and compact with an unbeatable price-performance ratio, it is the best choice for industrial applications as well as research and educational labs.

The Bode 100 VNA is the perfect tool for application fields like production, research and development, educational institutions as well as service and maintenance. The compact hardware is controlled from the easy-to-use and intuitive Bode Analyzer Suite via USB.

MEASURING ON THE GO

The lightweight and portable hardware design combined with the Bode Analyzer Suite for Windows guarantee a very easy and user friendly handling of the Bode 100. Moreover, an OLE automation interface allows integrating the Bode 100 in any automated system.

The Bode 100 system includes:

Bode 100 Vector Network Analyzer (Calibration certificate included.)
Bode 100 User Manual (English)
Wide-range power supply (with international plug adapters)
USB cable
4 x BNC cable 50 Ohm (m-m)
1 x BNC T adapter (f-f-f)
1 x BNC straight adapter (f-f)
1x BNC 50 Ohm load (m)
1 x BNC short circuit (m)
Test objects: quartz filter and IF filter on a PCB
2 Year Warranty

For more details, check out our Detailed Specifications and Software tabs above or download our Bode 100 brochure.

CALIBRATION

Calibration is performed as part of the manufacturing process. Factory calibration includes adjustment and calibration of the device and can be repeated anytime. The calibration includes a 6-month warranty renewal. Please ask for ISO 9001 Calibration and Inspection (Order number: P0005784). Every unit comes with a calibration certificate free of charge. The certificate is included in the delivery of a new device and after a repeated calibration. For information on Calibration, please see this page.

*PC not included
**MATLAB is a registered trademark of The MathWorks, Inc.
***Excel, PowerPoint, Visual C++, C#, VB2005 and Windows are registered trademarks of Microsoft Corporation
#LabVIEW is a registered trademark of National Instruments Corporation

OMICRON Lab Bode 100 Vector Network Analyzer

Name: OMICRON Lab Bode 100 Vector Network Analyzer
Brand: Picotest

Model Options

Quantity

Bode 100 Specifications

Signal Source:

Characteristic	Rating
Frequency range	1 Hz to 50 MHz
Waveform	Sinusoidal
Signal level range	-30 dBm to 13 dBm 0.007 VRMS to 1 VRMS (at 50 Ohm load)
Source level accuracy	± 0.3 dB (1 Hz to 1 MHz) ± 0.6 dB (1 MHz to 50 MHz)
Source level frequency response (flatness)	± 0.3 dB (typical, referring to 10 MHz)
Frequency accuracy after adjustment	± 2 ppm ± quantisation error ( = 0.5 · step size )
Frequency stability	± 2 ppm (< 1 year after adjustment) ± 4 ppm (< 3 years after adjustment)
Frequency step size / resolution	0.00605 Hz (1 Hz to 100 Hz) 0.03632 Hz (100 Hz to 50 MHz)
Source impedance:	50 Ohm
Return loss (1 Hz to 50 MHz)	> 30 dB, > 35 dB (typical)
Spurious signals & harmonics	< -55 dBc (typical)
Connector type	BNC

Input Specifications:

Frequency range	1 Hz to 50 MHz
Input impedance (software switchable)	High: 1 MO ± 2% \|\| 40...55 pF Low: 50 O
Return loss @ 50 O input impedance	> 28 dB, > 35 dB typical (1 Hz to 50 MHz)
Receiver bandwidth - RBW (software selectable)	1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 5 kHz
Noise floor (S21 measurement) RBW = 10 Hz, PSOURCE = 13 dBm, Attenuator CH1: 20dB, CH2: 0dB	1 Hz to 10 kHz: -115 dB (typical) 10 kHz to 10 MHz: -125 dB (typical) 10 MHz to 50 MHz: -105 dB (typical)
Input attenuators (software selectable)	0 dB, 10 dB, 20 dB, 30 dB, 40 dB
Input sensitivity / range	100 mVRMS full scale @ 0 dB input attenuator 10 VRMS full scale @ 40 dB input attenuator
Input channels dynamic range	> 100 dB (@ 10 Hz RBW)
Gain error	< 0.1 dB (User-Range calibrated)
Phase error	< 0.5° (User-Range calibrated)
Connector type	BNC

USB Interface:

Connector

Type B

PC Requirements:

Processor	Intel Core-I Dual-Core (or similar)
Memory (RAM)	2 GB, 4 GB recommended
Graphics resolution	Super VGA (1024x768) higher resolution recommended
Graphics card	DirectX 11 with Direct2D support
USB interface	USB 2.0 or higher
Operating system	Windows 7 SP1 or higher

Power - AC/DC power adapter:

Input voltage/frequency

100…240 V/47…63 Hz

Power - DC power requirements:

Input voltage range / power	+9…24 V / <10 W
Supply current	at 12 V: 580 mA (typical) at 18 V: 390 mA (typical) at 24 V: 290 mA (typical)
Low supply voltage shut-down	8.25 V (typical)
Power connector / socket	Coaxial power socket Inner diameter 2.5 mm Outer diameter 5.5 mm
Connector polarity	Inner connector ... positive Outer connector ... ground

Environment:

Temperature	Storage	–35…+60ºC/–31…+140ºF
	Operating	+5…+40ºC/+41…+104ºF
	For specifications	23ºC ± 5ºC/73ºF ± 18ºF
Relative humidity	Storage	20…90%, non-condensing
	Operating	20…80%, non-condensing

General:

Dimensions (w × h × d):

26 x 5 x 26.5 cm
10.25 x 2 x 10.5 inch

Weight - Bode 100:	< 2 kg/4.4 lb
Weight - Accessories:	< 0.5 kg/1.1 lb

Absolute Max Ratings:

DC supply voltage	+28V
DC supply reverse voltage (device doesn't work)	-28V
Maximum input signal at CH1 or CH2 (low impedance, 50 Ohm)	1 W (= 7 VRMS)
Maximum AC input signal at CH1 or CH2 (high impedance, 1 MOhm)	50 VRMS 1 Hz to 1 MHz 30 VRMS 1 MHz to 2 MHz 15 VRMS 2 MHz to 5 MHz 10 VRMS 5 MHz to 10 MHz 7 VRMS 10 MHz to 50 MHz
Maximum DC input signal at CH1 or CH2 (high impedance, 1 MOhm)	50 V
Maximum return power at the OUTPUT connector	0.5 W (= 5 VRMS)

Bode 100 Technical Data Sheet

One (1) Year Manufacturer's Warranty

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

Warranty: PICOTEST CORP. guarantees that this product meets its published specifications at the time of shipment from the factory.
Under proper installation it should work as expected.

Warranty Period: This equipment is warranted against defects in material and manufacturing for a period of one (1) year from the date of shipment. During the warranty period, Signal Edge Solutions is responsible for necessary repairs as long as the product can be proved to be defective.
For warranty service or repair this product must be returned to a service facility designated by Signal Edge Solutions. Please contact your local service representative.

Excluded Items: This warranty does not include consumptive parts such as fuses, buttons and relays. Neither does this warranty cover
defects caused by improper installation, improper or insufficient maintenance, unauthorized modification, improper operation, ignorance of environmental specifications or improper software or interfacing.

Remarks:

No other warranty is expressed or implied, except for the above mentioned.

The remedies provided herein are the buyer’s sole and exclusive remedies. Signal Edge Solutions shall not be liable for any direct, indirect, special, incidental or consequential damages.

Limitation of warranty

Our warranties do not cover any damage resulting from unauthorized modification or misuse.

Unless mentioned elsewhere in this document, our warranty does not apply to fuses, probes, and problems arising from normal wear or your abnormal operations.

Our warranties do not apply on any direct, incidental, special, or consequential damages.

The above warranties are exclusive and no other warranty is expressed or implied. Signal Edge Solutionsdisclaims any implied warranties of MERCHANTABILITY, SATISFACTORY QUALITY, and FITNESS for any particular reasons.

Model	Price
Bode 100 Vector Network Analyzer	$5990
PML 1110 Passive 10:1 Probes (QTYx2)	$440
B-AMP 12 External Power Amplifier	$990
Bode 100 Carrying Case	$110

OMICRON Lab Bode 100 Vector Network Analyzer

Detailed Specifications

Return & Refund Policy

Shipping Info

Warranty Information

Product Information